Quality Inspectors/Quality Control Technicians (Southwest Houston-77085)

Houston, TX

Full Time

Quality, Quality Control, Quality Assurance

Mid Level

Job Title: Manufacturing Quality Inspector/Quality Control Technician

Industry: Manufacturing of Window & Doors

Location: Central Southwest Houston Area, TX 77085 - 5615 West Fuqua Street, Houston, TX 77085

Employment: Full Time, Non-exempt, Hourly

Position Summary:

RAM Windows is looking for a manufacturing Quality Inspector/Technician for 1st Shift. The Quality Inspector Technician will perform an incoming, in-process, and final quality control inspection of insulated glass units, windows, and doors in accordance with established inspection checklists and quality standards. In addition, assisting production in identifying the root cause of defect trends and recommend corrective action as appropriate. Adhering to high-quality standards and keen eye for attention to detail is essential in this position.

Essential Duties and Responsibilities:

Performs incoming, in-process, and final inspection of insulated glass units, windows, and doors (and components) in accordance with established inspection checklists.
responsible for performing standardized quality control checks on our company products to ensure they meet the required company standards for safety and quality.
Collects, prepare and analyze data for corrective action and process improvement.
Reports quality anomalies and problems and issues to supervisor and production management.
Reviews reject and defect trends with production Supervisors
Perform process audits of equipment setup and conditions to ensure process controls are observed.
Measure products with tape measure, calipers, gauges, or micrometers
Adheres to all facets of safety policies and procedures.
Make recommendations of problem containment and/or corrective action to production leads and supervisors.
Perform process audits of equipment setup and conditions to ensure process controls are observed. Assist production in identifying the root cause of defect trends.
May maintain calibrated test equipment, prepare test data, and identify areas for quality control improvement.
Efficiently monitor the integrity and quality of company products without impeding production.
Recommend corrective/containment action as appropriate.
Follow all safety practices and precautions necessary for working in a manufacturing environment

*Other duties/tasks may be assigned

Education, Experience, Knowledge, Skills & Abilities:

High School Diploma or general education degree (GED) required.
Minimum of 2-3 years related experience as an Inspection or Quality Technician or similar role in a manufacturing, warehouse production setting; or equivalent combination of education and experience.
Bilingual (English and Spanish) is highly preferred.
Basic knowledge and understanding of the DMAIC process and common tools
Knowledge and understanding of manufacturing value stream from receiving to shipping
Ability to interpret engineering drawings
Strong knowledge of advanced mathematical concepts
High-level of visual awareness
Experience drafting inspection reports and collating data
Experience in analyzing and interpreting technical information
Must be safety conscious working with equipment and follow safety procedures.
Proven ability to work in a fast-paced environment
Problem solving skills required
Ability to use and read different measuring devices
Previous success working in warehouse, manufacturing, production setting
Ability to work in a team-oriented environment; cooperate and work proactively with others is a must.
Good communication skills; ability to communicate with respect to job assignments, job procedures, and applicable safety standards
Good attendance and punctuality is a must and reliable transportation
Ability to lift and carry 50 pounds alone and up to 100 pounds with assistance
Ability to work flexible hours as needed; willingness to work overtime as needed
Attention-to-Detail; values precision and adhere to high-quality standards

Job-Related Specifications:

Demonstrated judgment and decision-making ability
Quality – demonstrate accuracy and thoroughness, looks for ways to improve efficiency
Attendance and Punctuality – Report to work according to work schedule
Great Attitude – seeks to help and increase responsibilities
Team player – works amicably with all employees

Physical Requirements and Environmental Conditions:

Work in an enclosed, indoor manufacturing/machine shop environment; exposed to dust, heat, humidity, and cold weather conditions dependent on local weather conditions. Required to work in areas that are near moving mechanical parts.
Physical stamina and dexterity including the ability to regularly stand and walk up to 8-10 hours a day, bend, stoop, kneel, or squat.
Ability to lift, carry, push, and pull up to 50 lbs.
The noise level in the machine shop is considered moderate while operating machinery, equipment, and tools
Frequently use of fingers and hands to handle or feel objects or controls; reach with hands and arms
Have hand-eye coordination and are able to work in a physically demanding environment where standing is the norm
Specific vision abilities include close-up and distance vision, color vision, peripheral vision, and depth perception.
Utilize Personal Protective Equipment (PPE) when accessing certain manufacturing areas.

[Please note this job description is not intended to be an exhaustive list of qualifications, skills, efforts, duties, responsibilities or working conditions associated with the position Duties, responsibilities, and activities may change at any time with or without notice]

BENEFITS OFFERED

Weekly Pay (every Friday)
Overtime available as needed
Paid-Time Off, (2) Floating PTO days, and (8) paid Holidays
Medical, Dental and Vision Insurance
Company-Paid Life, AD&D, and Short-Term Disability Insurance
401K Retirement Saving Plan (up to 4% Company Match)

ABOUT THE COMPANY – RAM Windows & Doors

For over 30 years, RAM Windows & Doors has supported architects, builders and remodelers, commercial building contractors, developers and homeowners with the industry’s top windows and doors – and every custom package we deliver is equally designed and manufactured to create beautiful aesthetics, exceptional performance and long-lasting durability.

RAM is a Texas-based, leading manufacturer and distributor of high-quality windows and doors for both residential and light commercial construction. Our residential projects throughout Texas include custom, one-of-a-kind homes that typically range from $500,000 and up. Our light commercial projects can be found throughout the United States, and these types of buildings include hotels & hospitals, schools & dorms, government & civic projects, medical offices, worship centers, multi-family dwellings, restaurants, retail outlets and more.

EEO Statement
RAM Industries, LLC. is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, or veteran status. A reasonable accommodation will be considered for qualified individuals with a disability if it does not create an undue hardship for the Company, consistent with the ADA as amended

Apply for this position

Required*

First Name*

Last Name*

Email Address*

Phone*

Address*

Resume*

We've received your resume. Click here to update it.

Attach resume or Paste resume

Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

Who referred you to this position? Enter their first and last name here.*

What's your citizenship / employment eligibility?*

What's your highest level of education completed?*

Are you 18 years of age or older?*

What languages do you speak fluently?*

Desired salary*

Earliest start date?*

Can you work weekends?*

Can you work evenings?*

Can you work overtime?*

How many years of experience do you have as Quality Inspector/ Quality Control Technician position in a Manufacturing setting?*

We are located in the Central Southwest Houston Area between 288 South Freeway and Fort Bend Parkway Toll Road on Beltway 8 and West Fuqua/South Post Oak at: 5615 W. Fuqua St., Houston, TX 77085. Is this location okay for you to report to work on a regular and consistent basis?*

What measures do you put in place to maintain high-quality and focus throughout the day?*

What do you think is the most important job of the quality technician?*

Are you eligible to work in the U.S. for any employer?*

Will you now or in the future require Employer Sponsorship?*

The following questions are entirely optional.

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.

Gender

Race/Ethnicity

Invitation for Job Applicants to Self-Identify as a U.S. Veteran

A “disabled veteran” is one of the following:
- a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
- a person who was discharged or released from active duty because of a service-connected disability.
A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Veteran status

I IDENTIFY AS ONE OR MORE OF THE CLASSIFICATIONS OF PROTECTED VETERAN LISTED ABOVE
I AM NOT A PROTECTED VETERAN
I DON’T WISH TO ANSWER

Voluntary Self-Identification of Disability

Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 04/30/2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

Alcohol or other substance use disorder (not currently using drugs illegally)
Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
Blind or low vision
Cancer (past or present)
Cardiovascular or heart disease
Celiac disease
Cerebral palsy
Deaf or serious difficulty hearing
Diabetes
Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
Epilepsy or other seizure disorder
Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
Intellectual or developmental disability
Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
Missing limbs or partially missing limbs
Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
Partial or complete paralysis (any cause)
Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
Short stature (dwarfism)
Traumatic brain injury

Please check one of the boxes below:

YES, I HAVE A DISABILITY, OR HAVE HAD ONE IN THE PAST NO, I DO NOT HAVE A DISABILITY AND HAVE NOT HAD ONE IN THE PAST I DO NOT WANT TO ANSWER

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Name	Date

Human Check*

Submit Application